Felt edges.
When installing I-Wood Denmark® ceiling panels, we recommend a felt shadow edge to create a nice finish and a straight divider to compensate for any unevenness between the walls.
Felt and shadow edges
Read more about the felt we use in our panels and how we recommend installing a shadow edge before you install I-Wood Denmark® ceiling panels.
| Labelling | Eco-labelled OEKO-TEX® Standard 100 |
| Fire | B-s1,d0-approved |
| Felt strips | 3x16x2400/2780mm or 3x31x2400/2780mm |
| Felt cloth | 1 roll, 100 mm wide and 150 m in length |
The felt is produced from 100% recyclable plastic, a large proportion of which is collected from the world's oceans.
Shadow edge
Create a shadow edge from our filter rolls (1.5 x 100 mm) and attach it to the batten board before installing. We always recommend using batten board around all the walls of the room by omitting the outer batten board sideways and making room for batten board at the end of the room (min. 22 x 45 mm). Mount the batten board with felt together with the ceiling panels, so that all wall surfaces can be covered in one process.
You can also make shadow edges from a solid felt strip of 3 x 31 mm. These can be installed after the batten board has been installed in connection with ceiling installation. Please be aware that the shadow edge only covers 3 mm down the wall.
End moulding
Covers
MultiFrame
Shelves
Unique finish.
Unique finger joints
Sublime artisanship.
Easy installation
Sustainable
and recyclable.
What would acoustic panels look like in your home?
TRY VISUALISATION